….. and so it begins! Next Car Washes…. I wouldn’t mind a cushy Government job! 🙂 Or just purchase them! 🙂 Maybe if my Car Wash printed money like utilities?
Royal Services – On-site Car Cleaning Commercial Cleaning 205-568-7742 : Did they pay a Jefferson County Water Tap?
So does Royal Services have to pay some sort of sewer tap fee? I did. Or do they pay a fee to pollute the storm water? Actually is this legal? He was not capturing the runoff. This company or guy is probably costing Jefferson County more to clean up his mess then what he makes! Looks like maybe even HF wheel cleaner…. down the storm drain. Also I see a flammable sticker on a gallon of chemical right next to a gas generator in his van…. good location. I also assume he is storing it correctly when traveling… I didn’t say anything about that! He knows the laws in Alabama! 🙂 This guy probably even uses residential water. I wish I could use residential water.
Are boilers full of gold so you can scrap them and make bank! Well full of pure solid copper…. like 300 pounds of copper? :)
Well…. My Raypak W-0514A-BCDRDBA was not made of solid gold or copper! Best thing it had was 4 large asbestos sheets. The unit is so basic it is ridiculousness. All a boiler consists of is sheet metal, asbestos sheets, a heavy cast iron water exchange thing, copper coil things and a gas grill. Should cost $250! Well the asbestos exhaust tubes are expensive.
I also wouldn’t get all excited and expect huge payouts at the scrap yard either…. when you heard about the copper heat exchange tube (part# Raypak 002381F or a bundle 002369F). It wouldn’t scrap for crap unless it was gold. But I haven’t touched or weighed them. But one tube new sells for $222 and a bundle sells for $2,118….. interesting. I need to start building boilers! 🙂
The 5 Dollar Express Car Wash – BBB ranking F BAHAHAHAHA! :)
THIS BUSINESS IS NOT BBB ACCREDITED
The 5 Dollar Express Car Wash
(256) 293-7673
2285 US Highway 431, Boaz, AL 35957-5976
Over just one complaint?
09/12/2012 Problems with Product / Service
I am not confirming or denying I know the owner of this place. 🙂 But as much as I think this is funny! It’s not really fair that 1 complaint can give you an F! But there “employees” probably throw away the letter from the bbb… or if the bbb even really tries to “contact the owner of the business”? I really think the bbb is about 75-90 percent scam anyway. 🙂 Still funny though.
Jim Coleman / B&C Electronic Engineering, Inc. finest hour! :) Or the Swipe-N-Clean? Either one! LOL :)
Just to prove I will purchase any car wash item that was ever made! I now have in my possession a Jim Coleman Swipe-N-Clean. Actually Steve Week from Jim Coleman said B&C supports it now and gave me there phone number! LOL 1-800-852-4795 bce-inc.com
I purchased this item in a lot of crap and was thinking of “trying” to sell it. But I was wanting to see if the POS (point of sale people! 🙂 worked.
First off who on this Earth would call B&C and try to get crap software that B&C wrote in 1999…. it was crap in 1999. Did anyone every use this thing? 🙂 Did a programmer stop and think at some point… this is a really bad idea?
The unit has mirrored drives and the previous owners decided in there great wisdom to unplug one of the broken drives and not replace it. Then the other failed. SHOCKER! 🙂 So I was thinking B&C could send or allow me to download the software which as the owner of this machine I OWN!
So I called B&C and talked to some lady which seemed to imply I was trying to steal there old crap software? WHY? Seriously why? No really WHY? She wanted numbers from the computer which is fine… who cares? So she figured out that my unit was made in 2004. But it did not have the original Fujitsu hard drives in it!!!!!!!!!!!!!!!!!! SO? Then there was some well these were NOT MANUFACTURED from B&C and…. HOW ABOUT EVERYTHING IN THE ENTIRE COMPUTER IS OFF THE SHELF? You guys at B&E manufactured NOTHING! Especially the hard drives… which is even stupid to argue… but she liked to. So I asked if it was possible if the owner re-imaged new drives when a old drive died? (The 2 hard drives are setup in raid 1 or mirrored. Which you would just put in a new drive and it would rebuild the drive.) Basically I’m a moron….. yeah 🙂 Actually a moron could hookup any working drive and the motherboard not B&C would rebuild/copy the new drive.
This was the reason why I can’t get a new image of the old crap hard drive image: B&C has a “special license agreement with Microsoft”? Really? How about the crap box B&C build owns the license… which I purchased? So I own the license or actually the hardware it locked to that license? Well? Unless B&C used the same retail Windows NT license and every SNC they sold? Which by looking at the partial image from the hard drive they do have Microsoft Office also? and it looks like maybe even the full version of Visual Studio VB 5 which is stupid to license on every computer? But again I can just see all the files and VB5 wasn’t fee like VB is now in 1999. 🙂 (Maybe B&C can provide my licenses and documentation?)
The only “real info” I got from them was the unit was 3-4 units behind….. they couldn’t list them all but I didn’t care either. The “upgrade” is $3,200 (they have no manuals/documents but they can send me an invoice! 🙂 which after asking 2-3 time and then just saying “so you basically throw everything away?” Got the answer! They will not help me and nothing in the unit is worth keeping. Sounds like not even the display? But I was really getting sick of getting talked down to by someone who didn’t know anything. But don’t get me wrong! Why should she! It’s 13 years old! But she was just making up crap which is annoying. Like it has software we wrote on it…. yeah (3 small apps: interface, sync with icverify and music?)! Plus… didn’t I pay for them? Plus what good is the software now… or then? 🙂 I asked nicely and said I wanted them? 🙂 Plus ICVerify is doing everything! and master card doesn’t support that version anymore it’s all garbage. AN ASIDE (before I purchased this Swipe Thing): I did actually research icverify and thought it was really pretty good. I would purchase icverify! Don’t think B&C has anything to do with icverify either. Don’t think B&C really tried very hard with the SNC 1.0? I saw it in action. But I know someone used this unit… why you asked? Because ALL THE CREDIT CARD NAMES AND NUMBERS ARE STORED ON THE HARD DRIVE! But I guess this was before certain regulations maybe? 6056 transactions approved credit cards for $20… probably not that great from 5/2005-9/2012? (This SNC unit came from a 1mil+ Coleman mega sales pit. You know how they look and all the equipment they have. Everything Coleman…. which isn’t a bad thing at all. Just this SNC product is bad.) I haven’t looked at the access database yet. Which an access database is also great for production applications! Bad computer programmer JOKE 🙂
This makes me want to write my own computer based credit card system. With something like icverify it really wouldn’t be that bad. The only problem is having a computer. That’s why I needed to call B&C in the first place. I could only imagine how much they would charge for a new hard drive? LOL 🙂 If I had my own cc system I would charge $1,000,000! LOL
OMG! Check N Go / Title Loans is a bunch of soliciting litters…. plus whoever this lady is can’t listen…. What’s new?
Talk about annoying…. Try this place! Check N Go / Title Loans at 833 Allison Bonnett Memorial Dr Ste 101 205-744-3867
They have put there crap propaganda on all my equipment seems like all the time… what the &*$@ it there problem! I have seem it 3-4 time in the last months and my clean up guy calls and complains all the time (who know though 🙂
Seems like the little lady at check n go didn’t like it when I put a sign on her door? The lady only liked to make ugly faces and yell? She’s probably the one that puts the stuff all over my equipment? 🙂 Wonder why she didn’t want my sign on her door? I was using the sign they put on my equipment? HOW ABOUT ACTING LIKE A REAL BUSINESS? Or we can exchange advertising like I suggested? WOW! Next time Police…. maybe corporate but there probably independent? Crap I’ll switch businesses… except there are 300 check places around town…. sound familiar? 🙂 Plus employees are annoying! They want benefits then the government mandates it then you can’t have your 3 year old work 20 hour shifts anymore. LOL 🙂
Check ‘n Go
7755 Montgomery Road, Suite 400
Cincinnati, OH 45236
Only thing I regret it having crappy tape! The asses at check n go use tape that GETS ALL OVER THE EQUIPMENT AND TAKES FOREVER TO TAKE OFF. Actually I hate Check n go and that lady! I have wasted more time talking to the clean up person and cleaning up tape because some ass at check and go wanted to make $20 commission while making minimum wage. Unless it’s the “manager” that put the stuff on my equipment which would be pathetic…. It was probably the manage. 🙂 Plus why can’t they spell their name right? What does ” ‘n ” mean? I can’t spell or write but it looks stupid….. Kind of like….
OMG! OMG! OMG! I™M NOT KIDDING THIS PERSON SHOULD BE ARRESTED! :) UPDATE
Okay so the guy didn’t spend that much 25%. Which is good. But the guy said it came with lots of cool stuff! He also tried to sell me something! (Which I would have purchased if he sent me pictures and wanted less. 🙂 But I also sold him something! LOL 🙂 No he is a nice guy for a Canadian….
OMG! OMG! OMG! I’M NOT KIDDING THIS PERSON SHOULD BE ARRESTED! :)
Or every car dealership in the whole world should try to hire this guy! I mean the stuff is shiny but $2,400! Sorry $24,000! (It’s worth $2,400 maybe? 🙂 I mean come on total crap doesn’t even start to describe this self serve equipment! He has been trying to sell this crap since at least 12/7/2011 that’s when I got my first laugh. But if the guy got any money that’s good I guess just seems like a ton of crap to me. I should know I had that crap setup what a pos! I mean each bay would be worth $300 for parts = $1500, $200 a vac = $1000 ( if you wanted them if not $50), $300 max a bay for all the used bay crap if its stainless = $1500, $400 for the changer (if it’s really like new), $100 a vendor (if there really nice) = $400 and $300 for the fragrance machine maybe but there isn’t a picture so probably less. That’s $4,700 and you will get a crappy general pump setup that you will wish you never purchased…… trust me! 🙂 This was sold on ebay somehow.
5 BAYS of CLEAN CONCEPTS SELF SERVE CARWASH EQUIPMENT includes:
1.) All Stainless Steel pump module chassis w/electronic panel, belt guards, wireways, hour meters, and function indicator lights. 2.) 5-5 hp. Marathon three phase electric motors w/double pulleys. 3.) 5- Model W132 General Pumps (4gpm. @ 1200psi) w/double pulleys. 4.) Pre-wired controls for each bay including solid state timers, overload protected motor starters, and 100 volt fused transformers. 5.) All stainless steel modular hot / cold / soap / wax chemical and water mix tank with lid. 6.) Stainless steel coin meter boxes and wall vaults. 7.) Foam Brush System with stainless steel mix tank and Hydrominder proportioners. 8.) Tire Cleaner / Engine Cleaner System w/ stainless steel mix tank and Hydrominder proportioners. 9.) Foam Brush & Tire Cleaner control valve manifold on Stainless Steel panel for wall mount. 10.) 4 Floor Mat Holders for each bay. 11.) All High Pressure booms, foam brush booms, foam generators, brushes, brush hangers, valves, hoses, and trigger guns for each bay. 12.) Automatic weep freeze protection system. 13.) 1- BC-200 Rear Load ROWE BILL CHANGER (like new). 14.) 5- J.E. ADAMS 8500 SILVER TOUCH SERIES STAINLESS STEEL, dual motor vacuums. 15.) 4- LAUREL Single Column stainless steel drop shelf venders. 16.) 1- FRAGRA-MATICS stainless steel double fragrance dispensing machine. 17.) A few thousand dollars worth of new spare parts, hoses, and fittings go with this equipment.
All of this equipment is in excellent condition and was operating in perfect order until we shut it down in order to use the property for a commercial retail development.
Trust, Greed, Recession & Randy Nix of eaglecarwash
Okay my Dad was talking about something his distributor told him about how “Mars MEI bill acceptors were getting strung and it was so bad they had to put in some sort of timer to turn it off at night”? but there was a solution you could send it to Premier Car Wash Systems in Ga to fix the problem!? They would flash the firmware and it work be “better”.
Well I search around and found at Advanced Car Wash Systems ACWS that they even had a quote from somewhere not on there website but on there facebook page:
MEI Bill Acceptor ALERT!
Today we have been informed by MEI that thieves have found a way to successfully string MEI bill acceptors manufactured before 2011. If you have a bill acceptor(s) with serial numbers starting with 011 and higher they should not have this issue.
If their serial number starts with 520 and lower the bill acceptors will need to be updated with new software. Any MEI bill acceptor manufactured before 2004 or with serial numbers 014 and lower will need to have the board changed.
Please contact the ACWS service center to determine what your acceptor will need.
July 24 at 10:21am
I can read a little and I heard the weird story and it just sounded like BS. So I called my friend Randy Nix at 1-253-759-3277 where I get all my changer and entry unit repairs to set the record straight. (Not a plug! 🙂 He said a quick call to MEI would have supposed my thought it was a LARGE AMERICAN MISUNDERSTANDING and just WRONG! 🙂 Thank AGAIN Randy
I usually don’t do camera reviews BUT…..
The new Leica M Monochrom has got to be the dumbest idea I have ever seen! Why would anyone want a $7,950.00 Digital Rangefinder (no lens included) which is ONLY Black & White? Can’t you just purchase a M9-P or a poor persons M9 ($6,995.00) and convert color images like a normal person?