Well it is actually not crap, which is good, but it was silicone or caulking.
Foam brush hose problem
Kink in the foam brush hose. I just replaced the hose. The hose is really cheap and I would never purchase this crap again. I actually got it from my Dad.
Garbage lockup
I hate it when I “know” what the problem is!
So the problem is the high pressure wax function does not work in one of the bays. First I decided there was crap in the hp wax solenoid. So I slowly starved the pump of water to pull the crap out of the solenoid. That did not work so I removed the solenoid to clean it, which did not work. So I decided the problem was with the needle valve which I just removed all of them, that did not help. Then I pulled out my voltmeter and checked to see if I was getting voltage from the switch to the equipment room which I was not (I am getting somewhere!). So now I need to figure out how to check a rotary switch. I need to give Greg a call!
Harbor Freight / Central Pheumatic crap!
I guess it is about time to purchase a good air regulator? This is the second Central Pheumatic unit that has crapped out.
Water Wizard Preparation – Wire run
I had to rerun the Dixmor Weep Mizer wires today. It went from the crap in the first picture to the nice and neat last picture. But during the journey I blew its fuse so I had to drive to Lowes, which is great fun!
Moody tear down fun?
Today, I did not do anything very exciting except removing a lot of signs, misc. crap and a ton of hose clamps.
William started to break down the automatic and tomorrow we are going to start tearing out the self serve equipment.
Equipment room cleanup
After moving the pumping units yesterday I decided to cleanup the crap that was behind them today. I would never guess I had so much crap under the pumping stations. I did find a lot of screwdrivers though.
That took all day?
I technically hooked the last 2 bays up, so I have all 4 bays working off the Coleman equipment. The setup will not win any beauty contests. I did have a wire problem that was giving me a constant coin pulse to the timer. I had to swap some wires a long time ago because of a wire short, which cause me to have to retrace all the wires today. FUN. All this crap needs to be redone: we will see when that happens because it works now.
Crappy day
I opened my equipment room door and one of my shelves busted; crap was all over the floor. I also got 3 bags of garbage today.