Can you believe that one of my meter box horns are broken? I am afraid to open the meter box. Something bad will probably happen.
Foam brush mystery leak – Update
Today I figured out where my mystery leak was coming from. A super small cut above the brass fitting.
When I was removing the brass fitting I lost the screw-off cap. I tried this extra push lock t-fitting and then threw this away. (It seems to leak worse than the cracked hose.) Now the hose is directly connected to the solenoid bank.
Flojet push lock problem – Update
The tire cleaner is not working in any bays. So, I replaced the check valve today which was the only bay that did not work yesterday and then I figured out what the problem was, a wire was disconnected. The check valve in front of the Flojet was also stuck. Which means that this was not the broken bay.
I did replace 3 check valves today in 3 bays. Maybe I got the broken one? Tomorrow if I am still having a problem I can use these check valves to replace the other 2.
STOP HAMMERTIME
Maybe I should start a MC Hammer Fan Site? At least I found a video. Remember to “Stop – Hammer Time” and go buy some new pants.
[youtube]JomHWt7p6-c[/youtube]
Pressure washing fun – update
I finished the dip in the back of the wash today. I am thinking about trying and patching the dips. I can use my car to help compact the patcher.
Flojet push lock problem – Update
Okay, so my plan did not work. But the check valve before the Flojet got stuck shut which is good. I tested all the bays again and can not get any check valve to fail. The only hint I got today was the tire cleaner does not work in one of the bays. I think I found the bay, I will need to get a check valve and try and fix it tomorrow. I put a cone in the bay.
Nozzle problem again
The high pressure pattern is messed up and I replaced the tip. The last picture is something I purchase from KR and I really like it. It is a 1/4 tip wrench thing.
Flojet push lock problem – Update
When you see water coming out of the equipment room it is always bad. The supply line broke and the fitting to the Flojet was leaking. Now I can figure out what the problem is, only took 3 days.
I got to drain the tanks again.
So the problem is two check valves are bad. One check valve in a random bay and the check valve between the solenoid bank and the Flojet pump. The plan is to replace the check valve before the Flojet and the hose in the bay should burst because of the high pressure water. Then tomorrow I can replace that bays check valve. Sounds good?
Flies Mating
Well, I guess that is what they are doing. Maybe the fly on top is just showing the fly on the bottom his feet?
Ted’s Montana Grill
Ted’s Montana Grill is pretty good. They sell small burgers; I got the Kitchen Sink burger (real cow not bison). It had a just a couple items on top. It had grilled ham, mushrooms, onions, fried egg, bacon and swiss cheese. Oh, and some fries.