A coin jam signal with no coin jam.
Geovision GV800 card problem
We have lots of these cards and never had a problem like this. There was very bad weather last night but I have no idea what would cause this. All the cameras have power but I can not test to see if the cameras work yet. I do not have my testing equipment.
Vending machine problem
Jammed up Conlux bill acceptor.
Water Wizard hose problem
Water Wizard unloader hose problem.
Rowe changer problem
I got a "CK TRANSPORT VF" error but after checking there was no problem and I just reset.
Low pressure organization – Update
I mounted the Flojet mounting brackets on the wall and installed two pumps.
Vandalized Unitec speaker
Vandalized Unitec speaker it still works just mumbled.
MacGyver award winner: Low pressure organization
I replaced my Sandpiper pump with a Flojet today. The Sandpiper pump still worked fine but foamed a little.
I used the Flojet kit 20381-057 1/4″ OD tube connector for the outgoing chemical. (UPDATE: I shortly after this changed to all 1/2″ Flojet fittings. Then changed the outgoing to 3/8″ Flojet fitting.)
MacGyver award winning fix. The fix was 3/8″ barb to 1/4″ barb. After bitching about crafting this conversion I noticed all the other Flojets are setup the same. I think I am going to purchase some poly tube fittings 1/2″ for my Flojet setups.
These are the Flojet mounting brackets 20982100A that I purchased. They look cool and give any install a more professional look. I believe that my setup needs all the help it can get.
Hamilton Changer problems
At 19th street there was a bad bill. Then at Allison it said there was a coin jam.
Drain clogged
Drain was clogged will some mud. Dug out the pit and everything was okay. Finally to round the day off I cleaned out some more vacuums.