I had to fix my wheel barrel setup because it was attached to the pump stand that I plan on moving. I also made the wheel barrel go up higher then before.
Rowe changer problem
Error message "CK L COIN DETCTR" tried to reset and it would not today. I guess it might be officially broken.
Rowe changer problem
Error message "CK L COIN DETCTR" just reset.
Air regulator fixed
Finally got my regulator nut to fix my air regulator. I lost it when I removed it last time.
Rowe changer problem
Error message "CK L COIN DETCTR" just reset.
Water Wizard problem
Water Wizard problem at 9th street. William stole the part from Allison Bonnett. The problem was the top oscillating motor crapped out. Also, the parts man was out of town.
Replaced foam brush brushes
I replaced four of my foam brush brushes today. I used Erie hogs hair aluminum head brushes. (Part# 212300) I really like the aluminum head brushes, they look nicer. Until someone says they scratched there car with it.
I also figured out how to remove the brushes with a wise grip easier. I used a box cutter to cut about half an inch off the top. To remove the rubber grip. This allows you to use the wise grip to get it off easier.
But all was not well. When I was messing with the foam brushes two swivels started leaking.
Removed remaining old hose
I removed remaining old hose from the equipment room today. I should have done this a long time ago.
R/O Y line strainer
I install a Dema 1" 40 mesh Y line strainer. Greg said that I did not need one but it would not hurt.
Fragramatic vacuum problem
Fixed my vacuum problem again. The fuse burnt out again. There must be a larger problem. I will have to keep a better eye on it. Also, I filled up the shampoo and the spot remover in another vacuum. Now I need to order more. Which is loads of fun.