Category: Repair

Posted on

Rowe changer problems

I had the same error on both machines "CK L COIN DETCTR". 

I decided to take one out and clean it and the coin hopper.  I really did not know what to do.  I just knew neither changer worked.  I also dumped the coins out of the coin dispenser assembly.  I concentrated on the coin leds and censor.

It seems to work but I will have to check tomorrow.  Also, I love the Rowe instructions it seems to always boil down to replace the CCC.

Posted on

Vacuum problem

I installed a used vacuum motor and tested it today.  Everything worked great.

I am now having a problem with my fragrance part of the vacuum.  It looks like the gun was run over and pulled out.  Also, no chemical comes out of the gun.

Posted on

Coin acceptor problem

I exchanged out the IDX X-10 today with one from my Dad.  It still gives me the "COIN" error.  I guess the X-10 needs to be programed.  The coin acceptor has the same model number.

Posted on

Coin acceptor problem

I conformed today that the timer is definitely the problem.  It is sending a constant coin pulse.  I will need to see if William can fix the timer.

My IDX X10 is a model # X10CR5A070F.

Posted on

Broken check valve

This is the biggest piece of crap check valve I have ever seen.  It was on the gravity feed water line to the hp pump.  It is new (installed four days ago) and it literally fell apart.  It broke shut which means no water.  All the pieces fell in the tee below the check valve.  I caught myself putting it back together then threw it away.

Posted on

Coin acceptor problem

My Dixmor LED7 will only say "COIN".  I unplugged the timer and also tried to set the timer.  But apparently the timer will not do anything when it says "COIN".  Also, the coin acceptor will just steal money.

I called Dixmor (1-303-794-1387) and the guy told me that it was the coin acceptor.  The coin acceptor it just sending the coin signal.  I will need to check it tomorrow.