I just want to say all the functions worked in the bays before I opened them. I check them once a week and really never have problems. I just should not open the doors.
It all started with a coin jam. Someone really beat the crap out of it and the coin acceptor came unscrewed. I also replaced my broken in-line fuse.
I then tested the bay and the spot free did not work (purple and black wire). I did not know where the wire connected so I opened another meter door. Bad mistake. Now high pressure does not work on the second bay (second picture). Also, this red wire snapped off (third picture).
I believe my problem is the wires are corroded and seem very brittle. Also, the terminals seem rusted.
So I opened the third bay to fix the second bay. Again bad idea. You get the picture.
Eric,
Have you seen the 8 or 10 position rotary switches (Windtrax) that come with a wiring harness? They come with a female harness and you can buy a male harness to go with it and make for a sweet setup. If you don’t want the rotary switch you can just buy the male and female harnesses.
If I begin to have the types of problems you are experiencing I will probably wire one of these up and solder and shrink the electrical connections. I have never been too fond of electric wire on connections, especially those in the coin box…
Also, I got your message… Never open the box unless there is problem…
Brian