William installed the air line today for the automatic and I figured out why the equipment room floor has been wet. The Wizard holding tank has a very small leak somewhere in the edge of the tank (second picture).
Water Wizard Preparation – Clamp down low pressure hose
I clamped down the rail heat low pressure hoses that are in the automatic bay today. I could not clamp down the high pressure undercarriage today because I needed some washers.
Water Wizard Preparation – Clamp down high pressure hose
Today I clamped down the high pressure hoses for the automatic. There are only 2 hoses for the Water Wizard, 1/2″ undercarriage and 1″ main water supply.
Water Wizard Preparation – Inspection
Passed my final Inspection!
Water Wizard Preparation – Undercarriage
William installed the undercarriage today.
I tightened up all the hoses today to stop all the leaks.
Water Wizard control unit problem
We were having a problem already with the Wizard control unit not allowing us to test each function. Ends up that the Red Lion (1st picture, has a display on it) was not plugged in. The silver plug (2nd picture) was a little loose and that was the problem. So our first problem was solved!
Water Wizard Preparation – First car washed! KIND OF!
We washed the first car today! Well kind of washed the car: the chemical tanks and holding tanks need to be cleaned. There is no chemical, the air is not connected (that is why the boom is pressure washing the ground in the 4th picture), and I do not have enough water pressure to wash my little car. I have a 1″ water line going into the building and Greg said that it should be enough to work so we will look at it tomorrow.
Water Wizard Preparation – 1″ High pressure hose
Okay I had a 1″ 2 wire hose that I needed 2 fittings crimped on to. I called a Napa and they said to bring it in. Ends up they have no fittings and they thought I had the fittings also. So I tried another Napa which had the fittings but they did not know how to crimp them. Then I went to a tractor supply place that freaked out when I needed a pipe thread fitting, but they did only had one fitting. Then I went to Applied Fluids Systems, who fixed me up and everything was fine. The only problem is this little process took 2 hours.
Air regulator problem
I was having an air regulator problem today; it was leaking and would not turn. So I guess it needed to be replaced?
Water Wizard Preparation – Water lines install
I installed the RO hose along with all the fittings.
–> 
Soft water install with the Water Wizard install.
–> 
The first picture shows the fitting that I broke off and how it connects to the automatic.