Car Wash Blog / Self Serve Industry Blog and Forum
I purchased an extra c2000 Hamilton controller. I have always wanted an extra controller but I also want an extra Mars bill acceptor. I was testing out the new controller and it had a weird problem. It seems to shut down if you put in 3-4 bills in less than 30 seconds and then it restarts after 5 minutes. It did this 3 times in a row and I will email Randy and see what the problem could be.
I replaced all the barbs with Parker 1/8″ x 1/8″ push lock fittings. (I purchased from Grainger like MEP1 told me to. Thanks) But I am having a weird problem I can not figure out.
2/3 fragrances work, the one that does not work really should work though. This is what I tried.
1) Checked the wire from the timer to the solenoid with a voltmeter. Works
2) Button works and makes a sound when pushed, the air also keeps running when the button is pushed.
3) When I rewire (hot wire) frag 2 to frag 3 (broken) the solenoid will work fine.
4) When I rewire (hot wire) frag 3 (broken) to frag 2 the solenoid will not work.
5) Swapped the timer with another fragrance vacuum. Still does not work.
6) Ground seems to be all connected fine to the solenoid. Checked with voltmeter.
7) Rewire from the timer wire (wire harness) to the solenoid and still did not work.
The only things I did not check:
1) Voltage
2) Rewiring the wire on the wire harness to the solenoid.