Got to dig out the pits today, two wheel barrels full.
Rowe changer problem
Changers was out today. The error was CK L COIN DETCTR just reset.
Measurements
The vending is about 42″ long and about 31 1/2″ from the ground. Also, the bay walls are a about 12″ wide.
Water problem
The backflow preventer was preventing water flowing the correct way. I install my garden hose (which I had to cut because the end was bent) into the weep output. When I did this it worked but there was a weird noise like a gush of water then everything worked normally again. I guess the water flowing the wrong way into the backflow preventer made it work again. It needs to be replaced though.
The backflow preventer is 7 1/2 inches long.
Rowe changer problem
Both changers were out. One error was BUCKET POWER ON just reset. Second error was CK L COIN DETCTR cleaned the coin censer then reset.
Rowe changer problem
Changers was out today. The error was BUCKET POWER ON just reset.
Rowe changer problems
Both changers were out. One error was “BUCKET POWER ON” just reset. Second error was “CK L COIN DETCTR” cleaned the coin censer then reset.
Rowe changer problems
Error message “EXTRA COIN-L HOP”. Reset the changer.
Vault repair
New screw 1″ and nut 1/2″ square nut, from Home Depot.
Used a 1/4″ thick grinding wheel.
Leeds and Marcus example.
Do you want Street Credibility?
Only on one bay and taped on, which is good.