Vacuum power problem
Not sure what the problem is. I will have to check tomorrow.
Rowe High Security Bill Acceptor Inlet Plate for the BC-1400 – Update
There are six nuts that hold the face plate on. They are not very serviceable and took forever with my broken wrench. After I got off six from the one changer I noticed the two face plates were welded together. What a pain I have six more to go so I gave up. I liked how all the bottom nuts were all rusted.
The last picture is the almost free Rowe anti-security plate. I tested the new grinded plate on a spare cabinet that I have and it worked and lined up.
Weep entry locations
![IMG_3269[1].jpg](https://cwguy.com/wp-images/upload/File/200801/IMG_3269[1].jpg "IMG_3269[1].jpg")
![IMG_5920[1].jpg](https://cwguy.com/wp-images/upload/File/200801/IMG_5920[1].jpg "IMG_5920[1].jpg")
Rowe High Security Bill Acceptor Inlet Plate for the BC-1400 – Update
The first picture is what the BC-1400 looks like. The next picture is the security plate. I grinded off the coin cup.
Rowe High Security Bill Acceptor Inlet Plate for the BC-1400
High Rowe Security Bill Acceptor Inlet Plate for the BC-1400 Kit #27040201
I was missing 3 of the 4 screws and hex nuts. I order from Kleen Rite even though they sold me used stuff last time http://cwguy.com//?p=983 . But I will need to email them for some replacements. I tried to use another Rowe distributor and they could not be bothered to quote prices.
Documentation like the last pictures: http://cwguy.com//?p=1624
Rowe tech guy
I called Rowe today and they said they sell a high security face plate (27040201 KR: $54.64) which is good. But it only is for the bc-1400. The Rowe tech guy said I was sol on my bc-200. Then I told him I hated my Rowe changers and I was disappointed that they could not help me with my hammer problem. He actually faxed the install instructions like he said. Very impressive, I always have very bad luck with customer service people.
I have some pictures of the high security face plate. I think maybe I could get it to work. By cutting the face plate and drilling holes in the cabinet.
Rowe tech service hotline: 1-800-669-7693 E03
Super oily mess
A great oily mess. So good that one of Greg's cousins, which is a Police officer, dropped by to make fun. I do not understand the rusted out cans that were not opened. Not really that impressive, but five garbage cans full of crap.
Wrong bulb
This is what happens when you install the incorrect bulb. FYI, the glass cover was already broken.
www.roweinternational.com
I sent this message to Rowe today. I wonder if they have an answer?
I have two bc-200, a bc-1400 and two extra bill acceptors. I have had someone smash in two of my bill acceptors. Is there anything I can do to prevent this from happening again? The only advice I have gotten is to get rid of your changers. Is this the best advice? I have some pictures: http://cwguy.com/index.php?s=e03
Thanks
E03