Kleen-Rite free Monthly Special Calendar

IMG_0323.JPGIMG_0326.JPGIMG_0325.JPGIMG_0336.JPG

This time my Rowe High Security Bill Acceptor Inlet Plate for the BC-1400 Kit #27040201 must have been the retail version.  Not the repackage of other returns I got last time.  Last time I got two bill acceptor face places but only one or two screws.  This time I got all the correct pieces from Kleen-Rite and a calendar.

IMG_0339.JPGIMG_0352.JPGIMG_0353.JPGIMG_0364.JPG

It is pretty easy to install.  Just unscrew four screws.  Then drill some holes.

IMG_0368.JPGIMG_0377.JPGIMG_0372.JPGIMG_0380.JPG

Now a bolt goes all the way through.  Now that look more secure, or at least it looks like you can not put your hand in the machine.

Expand Wylam? Update

IMG_1161.JPGIMG_1172.JPGIMG_1180.JPG

My wife was second guessing the decision to build anything nice in Wylam.  I told her there were lots of houses that were nice in Wylam.  This being one of them.  It also won the "Keep Birmingham Beautiful Commission Award".

IMG_1465.JPGIMG_1434.JPG

She then reminded me of the house across the street from the wash.  Also, the one down the street.  She is so negative.

Expand Wylam?

IMG_1135.JPG

They want to build more houses where?  Yes, they want to rezone land to build more houses in Wylam.  The arrow shows where my wash is.  Wylam Oaks Residential Development

New competition

IMG_1055.JPG

I am not sure if they actually clean cars but the sign says:  "CAR WASH EXPRESS $5.00 SUV & Truck Wash Express $7.00 – $9.00 Come to the Side Entrance and blow your horn for service.  Also, we accept appointments and offer Free Pick-up and Delivery"  36th street in Wylam

Rowe High Security Bill Acceptor Inlet Plate for the BC-1400 – Update

IMG_0856.JPGIMG_0857.JPGIMG_0859.JPGIMG_0864.JPG

Some pictures before the high security inlet plate install.  Each changer plate is attached with six bolts that are a pain to get off.

IMG_0868.JPGIMG_0869.JPGIMG_0872.JPGIMG_0874.JPG

Pictures of the old inlet plate

IMG_0876.JPGIMG_0877.JPGIMG_0880.JPGIMG_0884.JPG

The new plate fits, but I had to drill new holes to attach the inlet plate.

IMG_0893.JPG

The installed security inlet plate.  These bolts are not flush like the original studs.

IMG_0911.JPGIMG_0915.JPGIMG_0918.JPG

The first picture shows how the plastic guard is attached to the front changer plate.  I had a problem getting the two welded changer plates back on.  So I had to grind them apart.

IMG_0922.JPGIMG_0925.JPGIMG_0926.JPGIMG_0940.JPG

This is the finished product, if the bill acceptors worked.  Which all three did not.  "REJECT-BILL K,L,S" and probably others.

IMG_0927.JPGIMG_0929.JPGIMG_0946.JPGIMG_0942.JPG

One of my bill acceptors also liked to eat bills.  It ate two while testing.  The last pictures are the before and after pictures.