My sandpiper pumps lost its prime again. The pump was constantly pumping and nothing would come out. I had to remove the outlet hose and it primed up again. Also, the air compressor must have been running allot because it was super hot.
Fuse blew again – update
I replaced the in line fuse today.
My relay is making a buzzing noise and I think that is what the problem is.
Vacuum motor problem?
William came to look at my Fragramatics vacuum today. We replaced two fuses and when the unit cut on it sounded like a motor problem. The problem is now I need to find my special hex key to open the vac top.
Entry Wizard 2.0 crap out again
Do you know the easiest way to fix an Entry Wizard 2.0? Cut the power. The beauty of this technique is you do not have to open the unit.
Also the ro system blew its breaker.
Fuse blew again – update
I checked the wiring today. I was going to run a wire from the meter box to the equipment room. But I brought the wire to my house. It looks like the wires could be damaged from the conduit.
Shelves remains removed
I removed all the remaining shelve braces today it has only been four months.
Air leak at the Express
The top horizontal blue air hose had a leak. It was fun to point it out when I did not have to fix it. Greg had the honors. It looks like the installers were pulling the hose and kinked it.
Sensortron broken coin acceptor problem
I replaced my old rusty coin stealing Sensortron with a new shiny Sensortron. Worked great.
Fuse blew again today
This is the same meter box that had a wire short out a while back. Greg seems to think that a wire shorting is the problem. I will have to check it out tomorrow. It also rained really bad today.
Fuse blew again today
Fuse blew again today. I believe I need to replace the power supply.