Car Wash Blog / Self Serve Industry Blog and Forum
My high pressure soap was not very soapy at all. So I dumped the chemical and started some new chemical. I also dumped my tire cleaner that was white.
My foam brush started to not come out of the brush at all.
So I changed the chemical air pressure up to 60 psi and the air air pressure to 40 psi seems to work great now. Also, knocked the tip down.
I fixed my vacuum hose problem. Guess how? I replace the vacuum hose. All by myself.
When I was at the tunnel a roller got stuck and shut down the conveyer. My Dad said it happened three other times today.
The blower blew the motor starter today. The blower motor starter is the bottom one.
I manually tested the blower and it worked after resetting the motor starter.
I am not sure why I posted this. I forgot to even ask what the problem was.
Vacuum hose problems at two locations. Time to replace two hoses.
RO System blew the fuse again. Greg turned the outflow down on the RO system the other day. I guess it did not help.
Water Wizard problem. Wire shorted out or something.
I am having the same problem with the presoak blowing the fuse. At all the splices they are corroded. I recut the wires and tried using the terminal blocks and without. Still the same problem. I guess I need to replace the wire to the bay.
I had a month long penny wash. Apparently one of my Sensortrons crapped out and started to accept pennies. I tried to adjust the selectivity and nothing helped. So I replaced the coin acceptor with a new one. I cashed in 5 dimes, 669 pennies, and 1 very bent quarter. The Coinstar stole one of my bent quarters. I should have complained. I also got a gold neckless. That was 675 things that should have been quarters a $168.75 value (if they were quarters). I just need to check more often and I was stupid. But a good learning experience. Also took about two or three hours to sift through the quarter and pennies.
