Weep system problem

IMG_5950.JPGIMG_5952.JPG

The weep system was running when I got to the wash.  It looks like a ground wire fell out of the harness.  I reattached the wire and still had the same problem.  It must be the solenoid?  I just turned the water off.  Problem solved, until I need to weep system again.

Unloader problem? – Update

IMG_5909.JPGIMG_5911.JPGIMG_5916.JPGIMG_5913.JPGIMG_5910.JPG

I completed the unloader replacement project.  I need to replace the blue high pressure hose and the weep is not connected.  My weep problem is because I cross threaded a crappy plastic connector.  But the high pressure is very good.

IMG_5903.JPG

I did have another problem with a high pressure tip.  This was a new tip and was clogged or something.  I am not sure.

IMG_5920.JPGIMG_5922.JPG

This is the comparison between the two setups.  Also, no project is complete with out this happening, everytime.

IMG_5898.JPG

Broken camera

IMG_5889.JPGIMG_5891.JPGIMG_5886.JPG

Well, my Canon PowerShot SD630 died today.  Not sure how it happened, but that was fast.  The error was "Lens error, restart camera", it is still under warranty so off to Canon.  http://cwguy.com/?p=1391

Canon Factory Service, 1440 Chase Ave., Elk Grove Village, IL, 6007  1-800-828-4040

Weep system problem already?

IMG_3414.JPGIMG_3462.JPG

I installed this hose 10 days ago and already a leak.  http://cwguy.com//?p=1524

The second picture is funny.  I was in the equipment room and heard two people talking.  One was saying I just drove up here to rinse off my car.  I looked over to the pump and it was off.  Then looked on the security cameras and noticed they both were using weep water to rinse their car.  Talk about taking all day and cheap.  I then did something very mean.  I turned the weep off.  Yes the one on the right is bucket washing also.