Car Wash Blog / Self Serve Industry Blog and Forum
My Mars acceptors were resetting and sporadically working. I thought it was related from the sun, this would explain the reason I have never had any problems except the morning after someone broke off the shields. So the plan was to use Lexan to be in-front of the bill acceptor.
This really was a 2 person job but my friend Duct tape and broom helped.
I had to grind down the nut and screw to allow it to lay flat.
Finished
4 vacuums were broken into. Not really sure why they tried to pry off the door when they had bolt cutters. I just used a hammer to fix all the problems.
Not really sure what happened but all the motor starters would not work. I had to reset 2 of them and the other I had to switch on then off the breaker. If you have any idea let me know.
It has been raining so much I guess the post just fell over? Or someone knocked it over. Because of the rain I can not concrete the post yet, but the concrete I had at the wash was ruined when I had the high pressure hose problems.
My RO water hose broke and was leaking, I also got a complaint.
My swivel was leaking and one of my wands broke on the same gun, but someone tried to fix it with electrical tape. I used an easy out to remove the broken off piece.
One of my motor starters quit working. I reset the starter and turned the blue knob to auto reset.
I cut the high pressure hose today with my grinder and the grinder slipped and I grinded another high pressure hose.
When I was looking at how deep I cut the hose I decided to turn on the water to see if the hose was okay. Now the problem with this was I put my hand over the cut, right as it burst, which did not feel very good. I fixed the problems with some reusable fittings.
I decided to fill 3 pot holes for now. I just pressure washed it, then dumped 50 pounds of QPR, then smoothed it out with a board.
Then ran over it with the car to smooth it out.
