Well, I really don’t know much about installing iron gates over your equipment room door. But I just know that I would use more than a 1″ anchor, right?
Good Job! Now I Have Chipped Bricks!
All that work for 1 quarter! Really! I remember when I tried to remove one of these vaults….. I had power tools and stuff and I gave up! I think if I gave the guy a whole day with a hammer and a chisel he couldn’t get it out.
Oh BTW I got the safe from the other car wash after a bulldozer knocked it out.
FragraMatics Vacuum Shampooer Brush – Update
My plan is to try and get this hose fixed at Napa. Hopefully I can get it recrimped and not send it to FragraMatics!
FragraMatics Vacuum Shampooer Brush
Nobody is going to be stealing your FragraMatics shampooer brush unless they cut the hose. I actually think this is a little ridiculous. You have to take out the screw which you really don’t need (There is no way the hose is going anywhere). Then I guess you have to remove the outside metal piece (second picture). Then the hose needs to be unscrewed from the nut that it is mounted in. Oh and that is not fun!
Unloader Problem
My Par Plate unloader decided to start shooting out water. So I got to purchase a new one!
I Blew a Fuse!
My FragraMatics Vacuum blew a fuse and I had to replace it. It uses a ABC-10BC3 which is a 10amp 250v fuse.
Have I ever mentioned that the FragraMatics Vacuums are a pain to work on? 6 screws to take off the top and they use security screws? Jim Coleman’s Vacuums only have 1 and no security screw. I really do like the security screw, but 6? At least it could be 4 maybe 3?
Dixmor Weep Mizer (DX1000)
My Dixmor Weep Mizer sensor broke last year and I am getting around to fixing it today! Or at least installing the sensor today. Notice on the second picture the little screw. This is how you adjust the temp. What it is not made in China!
When removing the old sensor I found another sensor! So I installed 1 and have 2 broken ones!
Not Cool!
I think you can figure this one out? It might be getting close to that time when I have to replace all my low pressure hose! YES!
Jim Coleman Fragrance Machine With No Fragrance
Looking like this was the problem with the fragrance vacuum. Not really sure what happened to it?
Break In Attempt?
Not really sure if someone tried to break in to get their Little Tree, but the machine was out of order and I lost TONS of vending sales!
Speaking of vending sales Greg and I were talking about vending machines breaking. He also has an old Dilling & Harris Max-Vend II Vendor. It really doesn’t make any sense to purchase an expensive vendor since the vendor costs around $3,500 to only make $100 gross a month? Then you have to stock the machine and if your lucky you make $50 net. You could do that with a couple crappy drop vendors.
So the plan is to sell the Maxy while it still works then install drop vendor! Take the money and purchase a sign or something that could actually make you some money!