Flowjet pump problem
My Flowjet pump kept pumping and would not quit and there were no leaks anywhere. William told me that the Flowjet was not able to prime. So the solution is to run the chemical in the bay and everything works fine and the pump shuts up.
Hamilton changer problem
Bill accepter blinking twice pausing and twice again. I cleaned the connectors for the bill stacker and the lights quit flashing. Hopefully it is fixed now.
Rowe changer problem
“CK TRANSPORT VF” Nice jammed bill.
Hamilton changer problem
Bill accepter blinking twice pausing and twice again. Cleaned and worked about eight times in a row.
Water Wizard problems
Broken osculating nozzle. Needed to be welded back together. With no welder William took one from Allison Bonnett and had to shut one of the automatics down.
Thriple foam broken
William, said all three hydrominders were broken. But I never checked to see how he fixed it.
Foam brush problem
Bobby, the chemical guy was not using the duel tip injector anymore. So he put a clear tip which has no hole in it. Then did not connect the correct hose to the intake and left. So the foam brush could not pull any chemical, actually it was just pulling more water from the holding tank. William pointed this out after I connected the chemical hose back how it use to be.
Broken vendor
The vendor had a towel hung so we had to open it. When we were loading it up we noticed one of the spindles was broken.
This is never good
Tire cleaner running down the side of the building this is never good. One of the fittings was broken.