This is not cool!
Coleman Shampooer Problem – Update
Now is the time to test the group of fittings that connects to the right of the solenoid. This is really bad because you have to take off the whole back panel.
Well I took off the panel to remove the solenoid and I had to take a picture (second picture) what was behind the panel. (The solenoid was being held on by 2 screws.) So I took off the group of fitting and they look totally clogged with rust. The barbs are the same way. I believe the only way to fix this problem is to order a new part from Grainger.
I Got a Scarecrow!
When I pulled up to the car wash today I thought it was odd that there were no crows….. Then I saw the scarecrow and I understood why!
Added a 3/4″ Check Valve
I added a 3/4″ check valve today. Just so happens that I was going to order one today online but Mike, a distributor (Premier Carwash Systems) in our area, pulled up at my car wash. So I just purchased the part from him…. really easy!
Just What I Wanted!
I needed some boards so I could build a skate board! Now all I need is all the other pieces. (Also the ability to ride a skate board).
Small Flood
Have I ever mentioned that I hate these pits? They are so shallow!
Coleman Shampooer Problem
Well, I guess this it just going to happen if you have an older Jim Coleman shampooer. The shampoo solenoid valve is rusted and is not allowing liquid to pass through.
Timer and Coin Jam!
I believe I had the coin jam first…… then someone hit the meter box until the timer wire harness got unplugged.
Carpet Cleaner Brush – Again
I replaced another Jim Coleman carpet cleaner brush today! It was fun……… like normal!
Shampooer Fillup!
I filled up one of my Jim Coleman shampooers today! It was fun! It was on one of the vacuums that I replaced the brush the other day.