New equipment idea – Move solenoid bank

IMG_9080.JPG

This is my solenoid bank mounted on the right side of the equipment room.  I have to move this on the left side so I can move in my new used Coleman equipment.

IMG_9091.JPGIMG_9092.JPG

This is the completed project on the left hand side.  I had two pumps not want to work and William helped my fix my pump problems.

 IMG_9088.JPGIMG_9084.JPG

Also, had a wire come off which is really not a surprise.

IMG_9086.JPG

The last thing was a tire cleaner fitting leak.  Which was pretty good for a move like this. 

X10 Problem – Resolved

IMG_9071.JPGIMG_9069.JPG

Well the X10 problem was really not resolved.  It was really replaced with this rusty Sensortron from one of my vacuums.

IMG_9073.JPG

I had to crack off the coin cup because the screws were very rusty and striped.

IMG_9076.JPG

The four wires were all the same colors like the X10 so it was easy to install.  Also, the Sensortron actually works.

New equipment idea – Reran wax line today

IMG_8974.JPGIMG_9008.JPG

Today, I reran the wax line.  (It is the closest line in the left picture.)  I moved the wax inside the high pressure soap tank.  Tomorrow, I will move the tire cleaner to the old wax tank.  Then have presoak inside the tire cleaner tank.  So if there is an overflow nothing harmful will be in the wax or high pressure soap tanks.