Weep system problem

IMG_6617.JPGIMG_6618.JPGIMG_6624.JPG

I am having a weep system problem.  The solenoid it always open.  Randy, I believe, a long time ago said it was mounted incorrectly.  So I turned the solenoid 90 degrees.  I was still having the same problem.  The solenoid was not energized and I think it is not getting power.

IMG_6627.JPGIMG_6630.JPG

I opened the junction box and a white wire and a red wire is running though the conduit.  There are two red wires connected to the solenoid.  The white wire splits to two red wires and the red wire it red all the way.  Not sure what the problem is or how to wire the solenoid, I need to look at the directions.

IMG_6631.JPGIMG_6632.JPGIMG_6633.JPGIMG_6634.JPG

I also looked at the Weep Mizer system and decided to clean the wires up.  There might have been a short previously because of the black marks on the wire harness.  While messing with the wire harness I almost burnt my thumb.

This guy stole my garbage can lid – Arrest Warrant time

IMG_5965.JPGIMG_5977.JPGIMG_5981.JPG

Well, I finally did it, I signed an arrest warrant.  It took long enough, it happened on October 3, 2006.

I thought the arrest warrant wanted to visit the site of the crime, so the second picture was where the “Theft of property” happened.  The third picture is the arrest warrant seeing what the garbage can lid felt like. 

I wish I had all my garbage can lids.  But ______ took one of mine because he needed gas money.

http://cwguy.com//?p=1303  E04

Weep system problem

IMG_5950.JPGIMG_5952.JPG

The weep system was running when I got to the wash.  It looks like a ground wire fell out of the harness.  I reattached the wire and still had the same problem.  It must be the solenoid?  I just turned the water off.  Problem solved, until I need to weep system again.