Omni left and the tri-foam, tire brush and neo glide wraps on right.
Moved presoak arch
They moved the presoak arch over to the right about two or three inches. Now the tire spinner will allow larger wheel based trucks to fit.
Simoniz Tire Shine Applicator
The tire shiner is schedule 80 pvc with foam pads. Sonny's installed the wrong tips and waisted 1/3 a drum of Pad perfect. Which I am told is not cheap. I guess the installers did not check either.
Sprayed for weeds
I sprayed for weeds today. It was lots of fun I used Roundup.
Timer problem
There was a timer problem today in one of the bays. The timer lost its memory and needed to be reprogrammed.
Weird chemical leak problem
I am having a weird chemical leak problem. The chemical tank is full. The foot valve seems to work. There is a leak around the pump area but I can not figure out what the problem is. I checked the foot valve and I shortened the hose on the outlet from the hydrominder. (The hole in the hose was under the chemical level.)
Flowjet pump problem
I had to put a hose clamp on the air intake. The connection between the hose barb and the hose was leaking.
New equipment idea – Clean old dilution tanks
Old dilution tanks getting removed and the mess left behind.
I was surprised how dirty they were. Also, the black clunks of crap in them.
After the cleaning process. They will need to be removed when I can borrow a truck.
New equipment idea – Scavenging
I scavenged all the pieces off the air line to the old low pressure pumps location.
Roof-Mounted attic fan – leaks
The roof fan leaks. I will need to repair the problem. Also, Greg pointed out that the cracks in the equipment room ceiling need to be plugged so the fan can pull air better.