Water Wizard Problem – Update

IMG_2104.JPGIMG_2105.JPG

Well I had the same problem today.  The presoak did not work and the pressure built up on the outgoing side of the check valve so the check valve could not open.  This time I called Greg for a little help.  I adjusted the air regulators (there are 2 air regulators one for the sides and one for the top).  I let the unit pump presoak for about 15 minutes and ran the gantry back and forth down the track to try and replicate the problem.  Greg believes that there is a kink in the presoak hose somewhere in the system.

The Procom pump is running at 75 psi and the pressure at the gantry is 50 psi, the air is set at 35 psi.

Leave a Reply

Your email address will not be published. Required fields are marked *