Month: March 2008

Posted on

Hydrominder Problem – update

IMG_2656.JPGIMG_3303.jpgIMG_3302.jpg

I guess whenever I touch something, something has to break?  The body of the hydrominder just cracked off, after checking what tip was being used.  After I cracked the body I noticed a large flaw in the Mark VII Proline design.  If you look at the last picture their is one pvc pipe and no shut off valves.  So you have to shut all the water off to repair one hydrominder?  I would imagine that Marc VII has fixed this problem in their new version of the Proline?  No customers because of the rain, but as soon as I cut off the water, there was a customer! 

IMG_3306.jpg

Posted on

Public restroom?

IMG_3323.jpgIMG_3324.jpg

This guy pulled up, stopped the car, started going to the restroom while shouting to a friend in another car then left.  The guy in the other car said it was because of the “chronic”?  Whatever that is?  By the time I figured out what was happening, he was gone.  I guess I need to install a new sign?

Posted on

Great idea at RaceWay

IMG_3281.jpgIMG_3289.jpg

I thought this was really a great idea.  This card allows you to swipe the card then go inside to pay via credit card or cash.  This is so you can start pumping gas before you pay.  The reason this is useful is they do not turn on any pumps until you pay cash or credit card.  But I want to use my credit card inside so I can charge my Jolt Cola and porn mags on the same bill.  What a dilemma!  They basically put you drivers license on file (not sure why they don’t use video cameras)?

Posted on

Hydrominder problem

IMG_2967.JPG

This is the high pressure soap hydrominder:  The eductor was leaking or at least it looked like it.

IMG_2973.JPGIMG_2976.JPGIMG_2979.JPG

The brass elbow somehow got eaten away which made the eductor seem cracked.  So when I was installing a new brass fitting, I cracked the plastic valve body.  I want to have constant repaires at all times.  Oboviously you should not over tighten the fittings to the body!

Posted on

Foam brush solenoid problem

IMG_3108.jpgIMG_3111.jpg

The good news is I fixed the solenoid problem.  It was very easily to do with my finger.  The bad news is I would have to keep my finger there forever.  So I decided to figure out what the problem was.  Their was a short in the wire and I rigged it up until tomorrow.

Posted on

New solenoid bank install

IMG_2869.JPGIMG_3075.jpgIMG_3074b.jpg

Well this old solenoid bank drank the last 10 gallons of tire cleaner that it will ever drink.  I really don’t like dumping good tire cleaner down the drain, so this was the last time for this thing.   This solenoid bank keeps sticking and I really don’t understand why.  It keeps moving from bay 1 and 2.  I would clean 1 then 2 would start, then 1 or 2 would drink all the tire cleaner overnight.  This happened three times and countless cleanings.  I think it is possessed?

IMG_3083.jpg

So I swapped it out with a solenoid bank that I purchased from Greg.  The solenoids are larger and when I installed them they didn’t work.  Note the red arrows:  this solenoid bank has metering.  Wow! this drove me crazy figuring this out.  But I should have figured it out at first, not after disassembling everything twice.

Posted on

Car wash supply purchase

IMG_2914.JPG

I need to start documenting my purchases better so I do not purchase the same crappy products all the time.  So….first the FedEx guy gets my stuff off the truck…

IMG_3115.jpgIMG_3114.jpg

The 2 powder chemicals that I purchased were:  1) JBS Hydro White Powdered Tire & Engine Cleaner from Kleen-Rite for $47.57 (JBBX5401).  2) JBS Frenzy Powdered Presoak from Kleen-Rite for $52.54 (JBBX5201).

I have already purchased this tire cleaner before and even though it says white it is yellow.  Also when you dilute it according to directions it is too weak.  So this is the cwguy tire cleaner mix.

IMG_3144.jpgIMG_3150.jpgIMG_3152.jpgIMG_3154.jpg

First I added 30 gallons of hot water.  Next I opened the garbage bag and scooped out some powder.

IMG_3157.jpgIMG_3161.jpgIMG_3175.jpgIMG_3183.jpg

I blended it all up and ran it for 30 minutes and pumped it out.  I think that I added the powder too fast because the last picture shows all that was left at the bottom.  It made a total of about 34 gallons.  I will let you know what it looks like when I use it.

Posted on

Making powder presoak

IMG_3114.jpgIMG_3184.jpgIMG_3190.jpgIMG_3193.jpg

This is JBS Frenzy Powdered Presoak from Kleen-Rite for $52.54 (JBBX5201).  This product looks just like the JBS tire cleaner.  It also looks the same when mixed up and it costs $5 more.  Now this might have been really stupid so check out what I did next.

IMG_3196.jpgIMG_3198.jpgIMG_3203.jpg

I have gotten complaints every time the tire cleaner it not yellow and the presoak is the same color as the tire cleaner.  So I added some red hyper concentrate tri-foam to turn the color anything but yellow.  So I got orange and the last picture is all that was left in the drum.  This time I gradually added the powder instead of dumping it in faster.

IMG_3205.jpgIMG_3222.jpg

Now I have around 46 gallons of ORANGE presoak.  That is a first?