I washed my wife’s car, cleaned up the car wash, then went back to the hospital. I confirmed again that the sofa is just like sleeping on the floor only elevated.
So the problem is the high pressure wax function does not work in one of the bays. First I decided there was crap in the hp wax solenoid. So I slowly starved the pump of water to pull the crap out of the solenoid. That did not work so I removed the solenoid to clean it, which did not work. So I decided the problem was with the needle valve which I just removed all of them, that did not help. Then I pulled out my voltmeter and checked to see if I was getting voltage from the switch to the equipment room which I was not (I am getting somewhere!). So now I need to figure out how to check a rotary switch. I need to give Greg a call!
Always fun to use my handi-clam to remove mud! I just need to clean out the septic tank more often then I will never have any problems.
I did a little pressure washing today with a 2300psi (I think?) pressure washer. It is better then the “Poor man™s pressure washer” but not really that great. How high of pressure can you get before you start ripping up black top and knocking out all the mortar on brick?