Year: 2007

When you see water coming out of the equipment room it is always bad.  The supply line broke and the fitting to the Flojet was leaking.  Now I can figure out what the problem is, only took 3 days.

I got to drain the tanks again.

So the problem is two check valves are bad.  One check valve in a random bay and the check valve between the solenoid bank and the Flojet pump.  The plan is to replace the check valve before the Flojet and the hose in the bay should burst because of the high pressure water.  Then tomorrow I can replace that bays check valve.  Sounds good?

The Flojet push lock fitting started leaking again today.  It looks like the brass insert in the fitting it coming out.  I just replaced it with about 5 other fittings (last picture).

What happened was the tire cleaner leaked on top of the holding tank.  Then the chemical leaked through the holding tank hinges.  This made the foam bush, high pressure soap and rinse water all be tire cleaner.  I had to siphon out all the tire cleaner. 

The hose wore out or something?  I took the hose out then cut the hose and reinstalled.