Rowe High Security Bill Acceptor Inlet Plate for the BC-1400 – Update

IMG_0856.JPGIMG_0857.JPGIMG_0859.JPGIMG_0864.JPG

Some pictures before the high security inlet plate install.  Each changer plate is attached with six bolts that are a pain to get off.

IMG_0868.JPGIMG_0869.JPGIMG_0872.JPGIMG_0874.JPG

Pictures of the old inlet plate

IMG_0876.JPGIMG_0877.JPGIMG_0880.JPGIMG_0884.JPG

The new plate fits, but I had to drill new holes to attach the inlet plate.

IMG_0893.JPG

The installed security inlet plate.  These bolts are not flush like the original studs.

IMG_0911.JPGIMG_0915.JPGIMG_0918.JPG

The first picture shows how the plastic guard is attached to the front changer plate.  I had a problem getting the two welded changer plates back on.  So I had to grind them apart.

IMG_0922.JPGIMG_0925.JPGIMG_0926.JPGIMG_0940.JPG

This is the finished product, if the bill acceptors worked.  Which all three did not.  "REJECT-BILL K,L,S" and probably others.

IMG_0927.JPGIMG_0929.JPGIMG_0946.JPGIMG_0942.JPG

One of my bill acceptors also liked to eat bills.  It ate two while testing.  The last pictures are the before and after pictures.

Leave a Reply

Your email address will not be published. Required fields are marked *