Weep system problem

IMG_6617.JPGIMG_6618.JPGIMG_6624.JPG

I am having a weep system problem.  The solenoid it always open.  Randy, I believe, a long time ago said it was mounted incorrectly.  So I turned the solenoid 90 degrees.  I was still having the same problem.  The solenoid was not energized and I think it is not getting power.

IMG_6627.JPGIMG_6630.JPG

I opened the junction box and a white wire and a red wire is running though the conduit.  There are two red wires connected to the solenoid.  The white wire splits to two red wires and the red wire it red all the way.  Not sure what the problem is or how to wire the solenoid, I need to look at the directions.

IMG_6631.JPGIMG_6632.JPGIMG_6633.JPGIMG_6634.JPG

I also looked at the Weep Mizer system and decided to clean the wires up.  There might have been a short previously because of the black marks on the wire harness.  While messing with the wire harness I almost burnt my thumb.

Leave a Reply

Your email address will not be published. Required fields are marked *