Broken back up air compressor – Update

IMG_8613.JPGIMG_8617.JPGIMG_8619.JPG

Well, I installed the belt today.  First I removed 3 bolts (3/8″) that hold down everything (last picture).

IMG_8624.JPGIMG_8627.JPGIMG_8626.JPG

Then removed 4 bolts (3/8″) from the pump thing.  This is how you get the belt on.

IMG_8628.JPGIMG_8631.JPGIMG_8634.JPGIMG_8635.JPG

Then put the belt around the plunger then around the small gear.  Then roll it around the large gear.  Done!

Misc. information about the compressor:

To order the belt just call 1-888-895-4549 and ask for the 007-0068 belt.  It is the only belt they ship / sell, so it is easy.

Kobalt (aka Lowes 99007 vlk1582609) 26 gallon air compressor manual:  http://www.powermate.com/productmanuals.php

Original post

One Reply to “Broken back up air compressor – Update”

  1. So I just removed the Piston from the large gear. It has some built in holes so you can place a bar inside to brace it, then use an allen wrench with optional breaker bar addition. Move the piston, slip off the belt.

    Hunting this thing down in town is a pain, Kobalt service center didn’t even know what the part was or which place actually made the compressor.

Comments are closed.