Archive | Information

RSS feed for this section

Holding tank project

IMG_0976.JPGIMG_1032.JPGIMG_1035.JPGIMG_1036.JPG

I want to convert a Water Wizard Hyper-Concentrate tank into a dilution holding tank. This would give me seven chemical tanks in the same place as three now.

IMG_1241.JPGIMG_2303.JPG

5 gallon chemical containers are about 15 inches tall.  This chemical container is about 19 1/2 inches tall. Sizes of the Water Wizard Hyper-Concentrate tank:

IMG_1298.JPG It is 60" long 5 feet. IMG_1300.JPG The fixed lip in the back it 9" long. IMG_1302.JPG The width on the tank is 24" long 2 feet. IMG_1305.JPG The height of the opening under the tank is 17 1/2". IMG_1306.JPG The height of the tank is 31 1/2". IMG_1312.JPG The width of the unit from the inside of the legs is 57 1/2"". 

An additional plan it to replace my other holding tank. This means that I need to remove the perviously install pvc pipes.

IMG_1220_1_.jpgIMG_2395.JPGIMG_1216_1_.jpgIMG_2401.JPGIMG_2400.JPGIMG_2403.JPGIMG_2405.JPG

IMG_2373.JPG

Coleman uses Parker 5/8" 300 psi hose to deliver water from the holding tank.

The large tank conpartment is 15 1/2" left to right and 11 1/4 top to middle and 12" high. From top to bottom is 24".

Xbox 360

IMG_0721.jpg

I actually bought a Xbox 360 two days before Christmas. David found two and I ran to Circuit City to purchase one. There was almost a fight and we had to pick them up behind the building for safety reasons. What a surprise.