Year: 2006

Had all the pieces I needed today.  So I mounted the pvc to the tank.  Also, I folded and tie wrapped the ends of the hose so I could do each bay one at a time.

Pretty blue wax.  It might be a little to strong.

I installed all the hoses and everything actually worked the first time.  Also, install the screen on the correct hole and plugged the old chemical line.

The last thing I did today was mount the soap line and all the pvc hoses.  Tomorrow, I will need to mount the hoses to the solenoids and attach the pvc to the tank.

Well, the plan is to mount the pvc that gravity feeds the chemical and water to the wall.  Today, I started the project with constructing the wax and soap lines.

This consisted of:  1)  8 x 19 1/2" long 3/4" pvc lines,  2)  2 x 5" long 3/4" pvc lines,  3)  10 x 3/4" x 3/4" x 1/2" elbows 1/2" threaded,  4)  10 x 3/8" x 1/2" nylon barbs,  5)  10 x 3/8" x 1/4" nylon barbs,  6)  6 x 3/4" medal clamps,  7)  4 x 3/4" elbows,  8 )  7 x 3/8" I.D. clear vinyl tubing,  9)  misc. pieces of pvc to connect to the tank,  10)  2 x 3/4" pvc caps,  11)  2 x 1/2" male x 3/4" slip end piece

No wax in the bay.  Usually means one thing.  Broken needle valve again.