I think the fire is a bad sign.
Cut replacement hoses
I had to go home early from the washes today so I cut some replacement hoses at home. I cut five foam brush hoses and five high pressure hoses. Of course I left my wrenches at the wash so I could not put on the reusable fitting for the high pressure hoses.
Mini-blinds time
I would have to say I have never seen this. Someone cleaning there mini-blinds. My Dad cleaned his oriental rug and I have seen people cleaning the inside of there car. But not this. He said it did a good job. He used the foam brush and the high pressure.
Shampooer vacuum problem
I would have to say this is a problem. I guess the cheesy tape job William did, did not work.
Replace pvc and mount on wall: reran power
I reran all the power to the second pump stand. I also moved the stand today.
I have a gain of 27" and between the third and the storage tank I have another 17". So I am still on schedule to get 44" spare space for my ro tank. I hope I can finish this tomorrow.
PVC Pipes for the chemical buckets
I cut and installed pvc pipes for the chemical buckets today. I had to replace the other pvc pipes because they were to large. Now my pvc is 3/4" which is just the right size.
Replace pvc and mount on wall: hot and cold water lines
These are some before and during the process.
This is the completed setup on the left. I also plumbed all the pump stations to the hot water tank. Everything seems to be working fine.
Album promoter?
I guess I was an album promoter for a little while. Hopefully the Mob did not see me throw the posters away. Maybe, I should not have said that. Actually, someone else threw them out. I have never seen these posters before. Someone else took this picture. That is not my car wash.
Rowe changer problem
Today, I reset the machine with the error message "CK L COIN DETCTR". It actually reset but I need to replace the coin detector.
Replace pvc and mount on wall: hot and cold water lines
This is a picture of the wax, soap and hot water lines. Also, a picture of the pump stand before the pvc removal.
I installed half inch elbows for the hot and cold water lines. Then I mounted the solenoid rack on the pump stand frame. Everything worked great. I will need to convert the last pump stand tomorrow. Also, move the electrical and run the cold water lines.