Jim Coleman light problem – Update

IMG_2371.JPGIMG_2378.JPGIMG_2380.JPG

Greg let me know where the photocell was in the Coleman vacuum (first picture). Besides looking broken, the photocell is actually broken. So I either need to take Mep1’s advise and not worry about it being on all the time or just replace it.

IMG_2381.JPGIMG_2383.JPG

One Reply to “Jim Coleman light problem – Update”

  1. That box is a serious mess. I’d replace it with an all PVC one.

    I’ve never seen that particular setup before, but since it’s already set up with a photocell it would only cost about $10 to replace it. You can get that same one at Lowe’s or Home Depot.

Comments are closed.