Look what I found at the carwash! A BABY!!
Well it might not have come from my carwash but my wife and I do have a new baby girl. She came out weighing 8 pounds 13 ounces and 21 1/2 inches long.
Fragramatics vacuum / Van Lock key problem
My Van Lock key for my Fragramatics vacuum self destructed today. Looks like the screw in the key was loose and when I turned the key the top piece fell off? This has never happened before and is really great because I do not have an extra key. So I will be ordering new locks and breaking into my own equipment!
TitleMax new advertiser?
TitleMax decided to be a new advertiser at my carwash today, what better place then on the changers! $25 if you refer a friend.
Hamilton credit card acceptor
I installed my new credit card acceptor that I received from Hamilton today. I hope this one works longer then the last acceptor!
How to cook hot dogs in the microwave? – UPDATE
You would be surprised how many people search my blog for “how to microwave hot dogs”. So I have been revising my hot dog making craft over the last year and decided to post my new method of cooking / boiling / microwaving hot dogs.
First get 2 glass bowls, one is the size of the hotdogs and the other is just acting as a weight. Second fill the bowl about 1/3 up with water. Third insert your hotdogs.
Now insert the small bowl on the hot dogs this will keep the hotdogs under the water to boil the them. Set the microwave for 4:00 on high and hit start. Then they should be done. Also, the bowls will be hot!
Another hotdog eating tip: When eating crappy hotdogs, try adding lots of Tabasco!
Hamilton credit card acceptor problem – Update
To get the Hamilton credit card acceptor out of the unit there are 4 bolts that hold it into the acw-5. Unbolt them and the credit card acceptor comes right out. Then remove 2 screws and the acceptor comes off the holder. I then mounted the new acceptor and reversed the process, tested my credit card and everything worked great! Now I can accept credit cards with my acw-5.
Hamilton credit card acceptor problem
So after the download procedure I noticed that my credit card acceptor was not working. It seems very easy to trouble shoot on the acw-5. There are 2 plugs (second picture) on the back of the reader the second plug (red and black wire) should be 5 V DC. While the top plug (yellow and brown) should be 5 or 8 V DC, of course it was ZERO V DC. So I need to purchase a new credit card acceptor because Hamilton does not repair the acceptors anymore. They cost $320 from Hamilton, but I called my buddy Randy Nix at Eagle Car Wash and he treated me right.
Recent Comments
I just built a system that fixes the problem of pressure you are referring to. The answer is 2 fold. 1.VFD+ Pressure 2.Monitoring Sensor. Set up where VFD runs at say "40%" putting out 150psi. Then have a sensor that is inline (before manifold) to when a second bay calls for product, and pressure drops, it senses this, and increases the VFD to say 50% to make up for the difference, and retain the 150psi. So on, and so forth depending on how many bays you have. It will take some tweaking, but once it is set, it is set. Also, you only can have a maximum of 5 ports open at once, even if you have 6 different functions, as each bay can only have one selection running at any given time. Email me, and I can give you more info, and / or if you want to buy one rather than build one. It is a very expensive "trial and error" job, as the VFD, pump, and sensor have to do the job right, and give the correct pressures. They will not share any of their tech, as they want us all to buy from ...
Did you know.... You can purchase the "quick disconnect" injectors from "Hydraflex™®? ©" (don't want to infringe on ™®? or © :P) , however you cannot purchase the quick disconnect adapters from them. Hmmmmm? Isn't that nice? Why not? Oh, that's right you can, if you purchase one of their "Aqualab™®? ©." TEN THOUSAND dollar units. Then, they will sell replacement parts for it, which include the quick disconnect fittings. Very frustrating to say the least. IN A STORY NOT RELATED -> If you want to never ever ever worry about check valves again, look into the icheck magnum series which you can buy from Kleen Rite (low ph, high ph, and high pressure) Also, if you are tired of replacing brittle, cracked, sun-drenched, winter haggard poly line, step up and buy the parker (or equiv.) "air brake" line (type B, reinforced). it will last for over 20 years in a carwash, and will outlast stainless steel when running corrosive product thru. I have been running HF thru it for over...
I love your sense of humor, but everything is in the details of any business what separates the strong from the weak is just a few minor details. But that few can be huge, for instance I love Arbys for their sandwiches, but many years ago their facilities were just run down and dirty, back then I would never go to the bathroom in one. Instead I went to Mcdonald's to go the rest room. Now in current time Arby's has gotten the idea that a very clean and modern facility with upgraded equipment will bring in customers. They even have open wifi in many, so that being said a business is the true salesperson it projects an image. Now one must ask yourself what image do you want to project to the public. You yoursef as a owner of a car wash or any business must be the salesman, because without a sale no one has a job. Mike...
I don't think you read the post. Maybe since your not a car wash owner you didn't get the joke? But your a sales person so... :) Maybe in Ohio the government is more restrictive I don't know? But when the government lets people start businesses that they want. Unforgettably to many people have built car washes because of sales people. Which makes them bad investments... so depending where someone is from you will get your desired remarks. Also you are selling a high priced item so only car washes with money would call you... another fact. So of course they would be making money. I also disagree with 90% of your statements except the place should be clean. You do not have to purchase top "knotch" equipment. You can run a super car wash with any equipment on the market. But again your a sales person. :) But I strangely want to purchase a boiler now.... JK LOL :)...
I have met many car wash owners that do make money in the car wash industry. Here is what I have found they are very organized, they buy top knotch equipment, they maintain it everyday, they check their water everyday, they ask for help when needed. Many are true salespeople they get out and meet the customers give them hugs and attend community events. And lets not forgot about having a very clean facility, customers love neatness. Mike Simmons, Vice-President...