Tag Archives: harnesses

Rowe wire harness time

After talking to Tom Kozlik from Rowe International he recommended Bsca’s Changer Service & Sales.  They seem very knowledgeable and Jeff is a great guy.  But Jeff seems to be having a problems with the Rowe tech.

IMG_5933.jpgIMG_5936.jpg

I have a Rowe C-10RL that I want to install a Coinco in.  The Coinco is a MAG50 24 volt and my Rowe CCC should support any MDB it is a 45085902.  If anyone has gotten this to work please let me know?

IMG_5937.jpgIMG_5940.jpg

Rowe sent me the incorrect wire harnesses.  These are the harnesses that I am suppose to plug into the Coinco.  (45108203, 45108204)  Not really sure what bill acceptor these are really for?

C-2000 Hamilton changer controller – Update

IMG_5178.jpgIMG_5184.jpgIMG_5176.jpg

Randy got my changers working before the weekend!  The only problem is that it is supposed to rain everyday.

Actually, both of my Cycle Inhibit Adapter harnesses were broken.  I just plugged in the new ones in and everything worked perfectly.  The only thing I hate about the harness is the small terminal that does not fit the bill acceptor.  The reason they do this is so you will put the harness in wrong and blow the bill acceptor (which I have done).

C-2000 Hamilton changer controller – Update

2586291822_ea54a47f78_m.jpg2617608048_e4e7113e5f.jpg

Randy told me to check out my Cycle Inhibit Adapter harnesses, which was the problem.  It has a short in the wires that are not wrapped.  I am just going to replace the harness.  But it was really weird that the changer had the same error yesterday 3 times in a row.  Then today it worked for 10-12 bills until I touched the harness; then I could make it turn on and off by touching the wires.  Great feature!