One of Wylam's MH wall pack blew out last night. I will have to replace with a 175 watt metal halide bulb.
Today, I saw this awful site from my Rowe changers (BC-200) both did not work. One had this error "CH L COIN DETCTR" which I did not have time to research. Then the other had this message "CK TRANSPORT VF" which was alot easier because of this.
I liked this sticker "Nowhere but Wylam". Alot of things that happen I say the same thing. Like when a lady in a new grey Honda Pilot hit the stop sign with a cop in my wash.
Today, I also had problems with my Hamilton changer. My hopper was jammed. I had to dump the coins and then put them all back in. Then everything worked again.
I learned something about my Jim Coleman Company vacuums today. Greg was fixing everything that was broken at my wash when we discussed the timer differences that I had.
Apparently if the timer (1034r timer sn-052200-88) has the new firmware it says "SELECT" and if the firmware is old it says "ADD". Also, you could test by pressing the buttons. If the buttons sound when pressed it is the new firmware. If there is no sound then it is the old firmware. This is important because the old firmware allows fragrance or vacuum and with the new firmware you can switch between the two.
I started by taking off the head on the pump today. When I took the head off it looked like above. The medal pieces had stuck to the ceramic shaft. After pulling the medal pieces off I put them back into the head. Then I noticed the ceramic shafts had black crap on them. Which I guess is bad? So I put some lube on them and put the head back on.
It still leaks and now the pressure in around 300. Which is bad. So now I do not know what to do.
Also, today I got to dig out two of my bays. YEA!
I am trying to repair my General Pump T1321 Series 47. It is pulsating enough to close off the bay. I replaced the check valve o-rings about two weeks ago and apparently forgot to replace the top three. The o-rings were damaged pretty good so I guess I need to look at the packing that I replace two days ago. I must have put the packing in incorrectly.
Now the head leaks and the high pressure is still pulsating. Hopefully tomorrow will be a better day for pump repair.