Closed down wash

IMG_0025.JPG

Today, I looked at a closed down wash that Greg said I should check out. It is a three bay and needs everything. It looks like it is in a good part of town. Or at least the same a Wylam.

Rowe changer fixed?

IMG_0011.JPGIMG_0012.JPG

The changer has not had a problem yet. I checked out what I believe Galen was talking about today. A tab that is at the bottom of the bill box.

 IMG_0024.JPGIMG_0021.JPG

I am using a model 4-50346-01 bill box which did not have the tabs. But I did have a stare 4-50346-03  bill box with tabs.  Everything looked okay and thanks for your advice.

IMG_0018.JPG

Rowe changer fixed?

IMG_9874.JPGIMG_9877.JPG
Today, I took out the stacker again and was planning on taking George’s advise about removing the snap clips and straighting the push plate. I looked and could not find them. So, I put a dollar in the unit and when the stacker pushed the push plate out I cut the power. This is definitely not the most graceful move but the end results are the same.
IMG_9879.JPG

Rowe changer problem

IMG_9806.JPG
Today, I was inspecting the changer and got an error message “CK STACKER”. Just like Mep1 told me to check the stacker. The stacker functions and everything works correctly. But the stacker “push plate” is bent.
IMG_9815.JPGIMG_9813.JPG
I am not sure how this could even happen but it did. I inspected my other changer and it is straight. IMG_9817.JPG