QPR Permanent pavement repair
I applied some of this QPR stuff today and pressed it down with a piece of 2×4. I hope this works because this would be a lot cheaper then using the crack filler.
More Vacuum island cleanup
I cleaned up two more island. Very exciting pictures but they did clean up nicely.
Foam brush problem
Interesting problem. The hose I guess is crappy? But the hose was not worn and it is Goodyear push lock. Maybe I should check about the hose.
Timer gets run over
I went inside to see who did this to the timer. When I was looking at the security footage I was thinking that just happened, he is still here. I guess I got his license plate, at 6 megapixels. I wish it was alway this easy.
QPR Permanent pavement repair
Time to try something new like QPR Permanent pavement repair. It is a cold patcher so I could not purchase a flame thrower, which it no fun. I will need to try it tomorrow.
Crack Stop – Test Run – Update
Black Jack Crack-Stop Elastic crack filler update. Not sure if this is what it is supposed to look like. But it seems cracked and collapsed. I guess I needed to apply more filler then I did but it was over flowing. So I guess I need to apply again or try something else.
Rowe High Security Bill Acceptor Inlet Plate for the BC-1400 – Update
I used my circular saw instead of my grinder this time. Looks alot better and was alot easier. http://cwguy.com/?p=1659
Look what I found
I found 29 tokens in with my quarters. I guess I am having a problem with a coin acceptor?
R&R after some pressure washing
Nothing better then some R&R after a couple hours of pressure washing. Well, maybe just some Rich & Rare Whisky that I found.
Vacuum island cleanup
I thought about not posting these pictures because they are embarrassing. But then I was thinking who cares, I am trying to fix this problem.
I also cleaned up the back of the wash.
Crack Stop – Test Run
I am trying to fix my weed problems by filling in the cracks. I am trying to use Black Jack Crack-Stop Elastic crack filler.
Was easy to apply and I hope it works, I should know in 24 hours.
Recent Comments
I just built a system that fixes the problem of pressure you are referring to. The answer is 2 fold. 1.VFD+ Pressure 2.Monitoring Sensor. Set up where VFD runs at say "40%" putting out 150psi. Then have a sensor that is inline (before manifold) to when a second bay calls for product, and pressure drops, it senses this, and increases the VFD to say 50% to make up for the difference, and retain the 150psi. So on, and so forth depending on how many bays you have. It will take some tweaking, but once it is set, it is set. Also, you only can have a maximum of 5 ports open at once, even if you have 6 different functions, as each bay can only have one selection running at any given time. Email me, and I can give you more info, and / or if you want to buy one rather than build one. It is a very expensive "trial and error" job, as the VFD, pump, and sensor have to do the job right, and give the correct pressures. They will not share any of their tech, as they want us all to buy from ...
Did you know.... You can purchase the "quick disconnect" injectors from "Hydraflex™®? ©" (don't want to infringe on ™®? or © :P) , however you cannot purchase the quick disconnect adapters from them. Hmmmmm? Isn't that nice? Why not? Oh, that's right you can, if you purchase one of their "Aqualab™®? ©." TEN THOUSAND dollar units. Then, they will sell replacement parts for it, which include the quick disconnect fittings. Very frustrating to say the least. IN A STORY NOT RELATED -> If you want to never ever ever worry about check valves again, look into the icheck magnum series which you can buy from Kleen Rite (low ph, high ph, and high pressure) Also, if you are tired of replacing brittle, cracked, sun-drenched, winter haggard poly line, step up and buy the parker (or equiv.) "air brake" line (type B, reinforced). it will last for over 20 years in a carwash, and will outlast stainless steel when running corrosive product thru. I have been running HF thru it for over...
I love your sense of humor, but everything is in the details of any business what separates the strong from the weak is just a few minor details. But that few can be huge, for instance I love Arbys for their sandwiches, but many years ago their facilities were just run down and dirty, back then I would never go to the bathroom in one. Instead I went to Mcdonald's to go the rest room. Now in current time Arby's has gotten the idea that a very clean and modern facility with upgraded equipment will bring in customers. They even have open wifi in many, so that being said a business is the true salesperson it projects an image. Now one must ask yourself what image do you want to project to the public. You yoursef as a owner of a car wash or any business must be the salesman, because without a sale no one has a job. Mike...
I don't think you read the post. Maybe since your not a car wash owner you didn't get the joke? But your a sales person so... :) Maybe in Ohio the government is more restrictive I don't know? But when the government lets people start businesses that they want. Unforgettably to many people have built car washes because of sales people. Which makes them bad investments... so depending where someone is from you will get your desired remarks. Also you are selling a high priced item so only car washes with money would call you... another fact. So of course they would be making money. I also disagree with 90% of your statements except the place should be clean. You do not have to purchase top "knotch" equipment. You can run a super car wash with any equipment on the market. But again your a sales person. :) But I strangely want to purchase a boiler now.... JK LOL :)...
I have met many car wash owners that do make money in the car wash industry. Here is what I have found they are very organized, they buy top knotch equipment, they maintain it everyday, they check their water everyday, they ask for help when needed. Many are true salespeople they get out and meet the customers give them hugs and attend community events. And lets not forgot about having a very clean facility, customers love neatness. Mike Simmons, Vice-President...