Expand Wylam? Update
My wife was second guessing the decision to build anything nice in Wylam. I told her there were lots of houses that were nice in Wylam. This being one of them. It also won the "Keep Birmingham Beautiful Commission Award".
She then reminded me of the house across the street from the wash. Also, the one down the street. She is so negative.
Expand Wylam?
They want to build more houses where? Yes, they want to rezone land to build more houses in Wylam. The arrow shows where my wash is. Wylam Oaks Residential Development
Rowe High Security Bill Acceptor Inlet Plate for the BC-1400 – Update
This is the extra security plate that bolts on the bill acceptor.
Mega time sign
I want to change my prices from $1.50 for 4 minutes to $1.75 for 4 minutes. The ”$1.50″ part is 2″ high and 3 1/2″ long. The $0.50 part is 1 3/4″. I also need to purchase new stickers for my meter doors.
Flojet hose problem
The air hose had a crack in it. It also seemed like the Flojet barb has a problem so I replaced it. No more air leak.
Vending machine problem
Do conlux bill acceptors cost money? I was just wondering, they like to eat customers money and shut down a lot.
New competition
I am not sure if they actually clean cars but the sign says: "CAR WASH EXPRESS $5.00 SUV & Truck Wash Express $7.00 – $9.00 Come to the Side Entrance and blow your horn for service. Also, we accept appointments and offer Free Pick-up and Delivery" 36th street in Wylam
Computer problems
I think I found what the problem was with the security camera computer. The AMD processor? I have had a couple die in the past and it seemed to work fine after I replaced it.
Coin acceptor problem
Apparently gum can cause a problem with the coin acceptor. Honest mistake from the customer.
Recent Comments
I just built a system that fixes the problem of pressure you are referring to. The answer is 2 fold. 1.VFD+ Pressure 2.Monitoring Sensor. Set up where VFD runs at say "40%" putting out 150psi. Then have a sensor that is inline (before manifold) to when a second bay calls for product, and pressure drops, it senses this, and increases the VFD to say 50% to make up for the difference, and retain the 150psi. So on, and so forth depending on how many bays you have. It will take some tweaking, but once it is set, it is set. Also, you only can have a maximum of 5 ports open at once, even if you have 6 different functions, as each bay can only have one selection running at any given time. Email me, and I can give you more info, and / or if you want to buy one rather than build one. It is a very expensive "trial and error" job, as the VFD, pump, and sensor have to do the job right, and give the correct pressures. They will not share any of their tech, as they want us all to buy from ...
Did you know.... You can purchase the "quick disconnect" injectors from "Hydraflex™®? ©" (don't want to infringe on ™®? or © :P) , however you cannot purchase the quick disconnect adapters from them. Hmmmmm? Isn't that nice? Why not? Oh, that's right you can, if you purchase one of their "Aqualab™®? ©." TEN THOUSAND dollar units. Then, they will sell replacement parts for it, which include the quick disconnect fittings. Very frustrating to say the least. IN A STORY NOT RELATED -> If you want to never ever ever worry about check valves again, look into the icheck magnum series which you can buy from Kleen Rite (low ph, high ph, and high pressure) Also, if you are tired of replacing brittle, cracked, sun-drenched, winter haggard poly line, step up and buy the parker (or equiv.) "air brake" line (type B, reinforced). it will last for over 20 years in a carwash, and will outlast stainless steel when running corrosive product thru. I have been running HF thru it for over...
I love your sense of humor, but everything is in the details of any business what separates the strong from the weak is just a few minor details. But that few can be huge, for instance I love Arbys for their sandwiches, but many years ago their facilities were just run down and dirty, back then I would never go to the bathroom in one. Instead I went to Mcdonald's to go the rest room. Now in current time Arby's has gotten the idea that a very clean and modern facility with upgraded equipment will bring in customers. They even have open wifi in many, so that being said a business is the true salesperson it projects an image. Now one must ask yourself what image do you want to project to the public. You yoursef as a owner of a car wash or any business must be the salesman, because without a sale no one has a job. Mike...
I don't think you read the post. Maybe since your not a car wash owner you didn't get the joke? But your a sales person so... :) Maybe in Ohio the government is more restrictive I don't know? But when the government lets people start businesses that they want. Unforgettably to many people have built car washes because of sales people. Which makes them bad investments... so depending where someone is from you will get your desired remarks. Also you are selling a high priced item so only car washes with money would call you... another fact. So of course they would be making money. I also disagree with 90% of your statements except the place should be clean. You do not have to purchase top "knotch" equipment. You can run a super car wash with any equipment on the market. But again your a sales person. :) But I strangely want to purchase a boiler now.... JK LOL :)...
I have met many car wash owners that do make money in the car wash industry. Here is what I have found they are very organized, they buy top knotch equipment, they maintain it everyday, they check their water everyday, they ask for help when needed. Many are true salespeople they get out and meet the customers give them hugs and attend community events. And lets not forgot about having a very clean facility, customers love neatness. Mike Simmons, Vice-President...