This was really bad. But it could have been a lot worse. The computer and monitor were on those shelves. The keyboard broke so I do not know it the computer is okay. The computer apparently requires a keyboard. I will need to change this tomorrow. I will need to put up better shelves.
Well it was not the solenoid it was the switch. I really messed up. I can not remember why I was convinced it was the solenoid.
I installed a hose clamp on the other side. This should have fixed the problem. My Dad told me I should do this yesterday.
Error message "CK L COIN DETCTR" just reset.
I assumed that the brushes were bad and exchanged them out. Then when that did not work I checked the nozzle. It was the nozzle. Then the coin acceptor would not accept coins. I had to adjust the sensitivity.
I can not seem to get the light to work on the vendor. The light will fully illuminate then turn off or light only half way.
Siphon breaker by drilling a 3/8" hole in the hose. Now it takes 10 seconds when turned on and 8 seconds to turn off. Very slow.
New grates that I changed out. They are reinforced on the ends and mine were not and mine were curling up.
Fragramatics coin acceptor jammed.