Archive by Author

Wylam float valve problem

IMG_8323.JPGIMG_8322.JPG

I also had a problem with my float valve. Luckily Greg gave William a float valve the other day. William replace the float valve but not before I tried taking off the broken one before I cut the water. Which it a bad idea.

IMG_8328.JPG

Stupid Wylam problem

IMG_8320.JPG

I did not repair the 3/4 inch tubing from the tank to the chemical. The tubing hardened up and when the chemical got low it could not reach in the chemical any more. The problem is it looked like it was okay. Now I know to replace when it gets to that state. 

IMG_8329.JPG

Wylam Rowe changer problems again

IMG_8314.JPGIMG_8296.JPGIMG_8327.JPG

Today both of my changers were out again. This time one had a penny in it.  Then the other had the same problem as yesterday. "CK L COIN DETCTR"  But William fixed it today. He said it was the light that counts the quarters.  I hope he is right.

Jim Coleman Company Vacuum

 IMG_8252.JPG

I learned something about my Jim Coleman Company vacuums today. Greg was fixing everything that was broken at my wash when we discussed the timer differences that I had.

 IMG_8257.JPGIMG_8266.JPG

Apparently if the timer (1034r timer sn-052200-88) has the new firmware it says "SELECT" and if the firmware is old it says "ADD".  Also, you could test by pressing the buttons. If the buttons sound when pressed it is the new firmware. If there is no sound then it is the old firmware. This is important because the old firmware allows fragrance or vacuum and with the new firmware you can switch between the two.